Victron Remote panel for BlueSolar PWM-Pro Charge Controller
Victron BlueSolar PWM-Pro Charge Controller 12/24V-20A
Solar charge controller
BlueSolar PWM-Pro
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.
• Lighting control function, fully programmable.
• Three stage battery charging (bulk, absorption, float), fully programmable.
• Integrated battery monitor function (Remote Panel needed to display state of charge).
• Load output with low voltage disconnect and manual control (default setting).
• Optional external temperature sensor.
• Load output protected against over load and short circuit.
• Protected against reverse polarity connection of the solar panels and/or battery.
• Day/night timing options: see manual Remote Panel for details.
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron BlueSolar MPPT 150/60-Tr Solar Charge Controller 12V/24V/48V
Solar charge controller
100VDC / 20A
12V/24V/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron BatteryProtect 12/24V-220A
The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the Battery terminal to the Load terminal. In case of use with a load, the battery connects to the Battery terminal, and in case of use with a charger, the charger connects to the Battery terminal.
Victron BCD 402 2 batteries 40A (combiner diode)
Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.
Delkor NS70L/80D26L
12V
70Ah (Same size as the 65Ah)
Semi-Sealed Maintenance Free
- Calcium maintenance free dual purpose battery
- Low-Resistance envelope separators
- High strength polypropylene case
- Heat Sealed covers
- Exclusive patented liquid gas separator
- Built in Hygrometer
Victron Current Transformer 100A:50mA for MultiPlus-II (20m)
Victron M8 circular connector Male/Female 3 pole cable 1m (bag of 2)
Victron Orion-Tr 24/24-12A (280W) Isolated DC-DC converter
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
Victron Orion-Tr 24/24-5A (120W) Isolated DC-DC converter
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
Victron Orion-Tr 24/12-20A (240W) Isolated DC-DC converter
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
Victron Orion-Tr 12/12-30A (360W) Isolated DC-DC converter
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
Victron Skylla-TG 24/50 GMDSS 120-240V
The Victron Skylla-TG 24/30 and 24/50 GMDSS Chargers have been designed to provide all required monitoring and alarm data. Both the battery and the GMDSS system are connected directly to the charger. Data and alarms are displayed on a digital panel (VE.Net GMDSS panel, to be ordered separately). A standard eight wire UTP cable connects the charger to the panel.
- 120-240VAC
- 24VDC charger
- 30A charger
- 1 full output rated
Victron EasySolar-II 24/3000/70-32 MPPT 250/70 GX
All-in-one solar power solution
The Victron EasySolar-II GX integrates the following elements:
• A MultiPlus-II inverter/charger
• A SmartSolar MPPT -Tr solar charge controller
• A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
24VDC, 3000VA
70A Charger, 32A Transfer Switch
250VDC 70A MPPT
Victron Phoenix IP43 Smart Charger 24 V / 16 A (1+1) 120 - 240V ac
</ = 16 A Main House Battery Charger Plus </= 4 A Battery Maintainer for 24 V Primary Cranking Battery
Wide AC Input Range 120-240 Vac
Adjustable DC Output Current Setting
Ready for Parallel and Redundant Operation
Natural Convection Cooling
Adaptive 5 Stage Charge Algorithm
Less than 1 mA Self Consumption
Full Rated Output up to 40 Deg C
IP43 Degree of Ingress Protection
Requires CE 13 "Kettle" Plug - Not Included
Victron Quattro II 48/5000/70-50 230V VE.Bus
Multifunctional
Pure Sine Wave Inverter / Charger
2 AC Inputs and Auto connects to active source
adaptive charging, hybrid PowerAssist technology, plus multiple system integration features such as 3ph or 1ph / parallel operation.
5000VA / 4000W @ 25°C
48VDC, 70A Charger, Lithium Ion battery compatible
230VAC
Victron Anti-Islanding Box Ziehl UFR1001E 63A single and three phase
The Anti-Islanding Box 63A single and three phase is a combination of an anti-islanding device, the Ziehl UFR1001E, two in-line contactors and main circuit breaker. It is suitable for both single phase or 3 phase systems. It is rated up to 63A per phase and all parts are conveniently housed in an IP65 rated enclosure.