A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
Victron Energy, ADA010100100, Mains Cord CEE 7/7 for Smart IP43 / Skylla-S Charger 2m
The VE.Can RJ45 terminator comes in a bag of two when ordered separately. The terminators are also included with some products, for example with the CANUSB.
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
Battery Indicator Eyelet M8
LBSA (Lithium Batteries South Africa) Battery Programming Cable
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.
Suitable for batteries that require a Type B BMS Cable
Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.
Suitable for batteries that require a Type A BMS Cable
Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.
Suitable for batteries that require a Type A BMS Cable
Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.
Suitable for batteries that require a Type B BMS Cable
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system.
Suitable for LBSA and Volta to Victron GX Device
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
Victron VE.Direct non-inverting remote on-off cable
Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.
Note that it's not necessary to use this cable on the larger SmartSolar models, as they feature an onboard Remote On/Off terminal.
The charger will be enabled when the signal on the cable is high. The charger is disabled when the source signal is pulled low or left free floating.
Note that when using this cable, it's not possible to use the VE.Direct port for any other purpose. Such as connecting to a GX device, or for example a VE.Direct Bluetooth Smart dongle on a BlueSolar charger.
This splitter is used to connect the MultiPlus 500VA - 1600VA range in parallel and 3 phase configurations, or in other installations where multiple VE.Bus ports are required.
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
VE.Direct cables, use to connect BMV-70x and low power MPPTs to a Victron GX Device
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models.
Battery indicator panel
Battery State of Charge (SOC)
The battery indicator panel shows the state of charge of the battery. It is an accessory for the Blue Smart IP65 Chargers.
Suitable for 12V lead acid batteries (flooded, GEL, AGM)
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.
RS485 to USB interface to connect ET112, ET340 and EM24 to Victron GX Devices
The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.
RS485 to USB interface to connect ET112, ET340 and EM24 to Victron GX Devices
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
SmartSolar Control display
Victron M8 circular connector Male/Female 3 pole cable 1m (bag of 2)
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
Victron Current Transformer 100A:50mA for MultiPlus-II (1m) Wire-end
Victron Wall mounted enclosure for Color Control GX and BMV or MPPT
Victron Smart Battery Sense long range (up to 10m)
Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.
With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.
Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect App. View information wirelessly such as battery status and solar panel power, plus other useful data.
The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers.
Victron Current Transformer 100A:50mA for MultiPlus-II (5m) Wire-end
The ET112 (for single phase max. 100A) and the ET340 (for three phase max. 65A) Energy Meters are typically used in an Energy Storage System.
To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.
Victron Interface MK3-US
(VE. BUS to USB-C)
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Victron Current Transformer 100A:50mA for MultiPlus-II (20m)
Victron Current Transformer 100A:50mA for MultiPlus-II (20m) Wire-end
Victron Interface MK3-US
(VE. BUS to USB)
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
The ET112 (for single phase max. 100A) and the ET340 (for three phase max. 65A) Energy Meters are typically used in an Energy Storage System.
To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.
Using the VE.Direct to LoRaWAN module you can connect your BMV, MPPT or Phoenix Inverter to the Victron Remote Management portal. View information such as battery status or solar power wherever you are on your desktop or mobile phone.
The VE.Bus Smart dongle is two products in one:
Bluetooth accessory for range of inverter/chargers and our series of Phoenix Inverters with a VE.Bus port.
Secondly it can work as a Voltage- and Temperature-sense device for the inverter/charger. This works with all models.
This pair of Zigbee converters is to wirelessly connect an Energy Meter to a GX Device.
You will require both products to connect the Energy Meter to a GX Device
Zigbee to USB converter, DRF2658C, DTK (THIS PRODUCT P/N: ASS300420200)
Zigbee to RS485 converter, DRF2659C, DTK (NEEDED AS WELL, NOT INCLUDED P/N: ASS300420100, Link to product: https://createenergy.co.za/home/566-victron-zigbee-to-rs485-converter-wireless-for-et112-et340-em24-energy-meters-8719076048268.html
The ET112 (for single phase max. 100A) and the ET340 (for three phase max. 65A) Energy Meters are typically used in an Energy Storage System.
To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Victron Battery Monitor BMV-700 Retail
The BMV-700 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
6.5 - 95V
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
This pair of Zigbee converters is to wirelessly connect an Energy Meter to a GX Device.
You will require both products to connect the Energy Meter to a GX Device
Zigbee to USB converter, DRF2658C, DTK (NEEDED AS WELL, NOT INCLUDED P/N: ASS300420200) Link to the product: https://createenergy.co.za/home/567-victron-zigbee-to-usb-converter-converter-wireless-for-et112-et340-em24-energy-meters-to-gx-device-8719076048275.html
Zigbee to RS485 converter, DRF2659C, DTK (THIS PRODUCT, P/N: ASS300420100)