Mecer IVR 1200 LBKS 1200 VA/ 720 Watt Modified Sine Wave Inverter/Charger 1200VA (720W) Only
Mecer IVR-1200LBKS Series 1200VA Plug and Play Inverter/Charger
- 1.2kVA / 1200VA / 720 Watt Output
- Includes 3 RSA 3 pin plug points in the top of the inverter
- Plug and Play Inverter/UPS
- Modified Sine Wave Output
- 10 A / 20 A (User Selectable) 12 Volt Battery Charger
SOLD OUT
Mecer IVR-1200LBKS Series 1200VA Plug and Play Inverter/Charger
720 Watt Maximum Output!
*Product Specifications are subject to change without prior notice.
Please contact us for quantity discounts
Email: info@createenergy.co.za or telephone: +(27) 11 888 0410
The Mecer IVR-2400LBKS Inverter/Charger Unit is a high quality Plug and Play Inverter/Charger
1200VA Mecer Inverter/Charger:
- 1.2kVA / 1200VA / 720W (0.72kW)
The Mecer Inverter/Charger Range includes the following sizes:
- 1.2kVA / 1200VA / 720W / 12VDC Inverter/Charger
- 2.4kVA / 2400VA / 1440W Inverter/Charger
Overview:
The Mecer Inverter/charger converts DC power to Simulated (Modified Sine Wave) AC power with amazing transfer efficiency.
With it's compact design and aesthetic appeal, the Mecer IVR series is excellent for home use on appliances such as TVs, media centers, lamps or computers
Recommended Battery and Performance Expectation
With ONE (x1) 100 Ah 12 V Calcium Marine Deep Cycle Battery
4 Hours Run Time for 150 Watt Load...
This results in a 100 % Depth of Discharge Cycle (2 hours results in a 50 % Depth of Discharge Cycle)
REQUIRES 9 HOURS OF BULK CHARGE AND 4 HOURS OF ABSORPTION CHARGE TO ATTAIN 100 % STATE OF CHARGE USING 10 AMP CHARGE RATE!
(Suggest using 20 A Charge Rate during Stage 5 and higher Load Shedding...This will accelerate Wear and Tear on the Battery, but not as severely as operating at Low State of Charge!
With TWO (x2) 100 Ah 12 V Calcium Marine Deep Cycle Batteries
4 Hours Run Time for 350 Watt Load...
REQUIRES 9 HOURS OF BULK CHARGE AND 4 HOURS OF ABSORPTION CHARGE TO ATTAIN 100 % STATE OF CHARGE USING 20 AMP CHARGE RATE!
NB: AS THESE INVERTERS FEATURE A FIXED NON ADJUSTABLE ALGORITHIMS FOR CHARGE VOLTAGE AND LOW VOLTAGE CUT OFF SETTINGS....WE DO NOT RECCOMEND THEIR USE WITH VRLA AGM (ABSORBED GLASS MAT PLATE SEPARATION) NOR WITH "LONG LIFE" GEL DIELECTRIC BATTERIES!
The Mecer IVR series of Inverter/Chargers feature:
• Fully Automatic Simulated (Modified) sinewave inverter.
• Wide input voltage range
• 12VDC or 24VDC available
• Overload and short circuit protection with Fan for Cooling
• LCD display for comprehensive information
THIS MODEL FEATURES MODIFIED / SIMULATED SINE WAVE OUTPUT!
NB: AC motors, Fluorescant Light fittings with Magnetic Ballasts and Transformers will be damaged by the Modified Sine Wave Output Waveform. Likewise, Repetitive Magnetization Peak Currents (100 Times Per Second) are likely to cause Abnormal Wear and Tear on the Inverter and even cause it to fail!
Modified Sine Wave Inverters should NOT BE USED FOR SENSITIVE MEDICAL EQUIPMET (eg: Oxygen Generators)!
Create Energy also offers a range of Pure Sine For Pure Sine Inverters, Please contact us to discuss if unsure!
MODIFIED SINE WAVE INVERTERS SHOULD ALSO NOT BE USED WITH LIFE SUPPORT MEDICAL EQUIPMENT!
MODEL | IVR-1200LBKS | IVR-2400LBKS |
CAPACITY | 1200VA/ 720W | 2400VA/ 1440W |
INPUT | ||
Voltage | 230 VAC | |
Acceptable Voltage Range | 90-280 VAC | |
Frequency | 50 Hz/60 Hz (Auto sensing) | |
OUTPUT | ||
AC Voltage Regulation (Batt. Mode) | ± 10% | |
Efficiency (Peak) | 82% | 85% |
Transfer Time | 20 ms typical | |
Waveform (Batt. Mode) | Simulated sine wave | |
BATTERY & AC CHARGER | ||
Battery Voltage | 12 VDC | 24 VDC |
Floating Charge Voltage | 13.7 VDC ±2% | 27.4 VDC ±2% |
Low Battery Alarm Voltage | 10.2Vdc ±2% | 20.4Vdc ±2% |
Shutdown Voltage | 9.9Vdc ±2% | 19.8Vdc ±2% |
Overcharge Protection | 15.0Vdc ±2% | 30.0Vdc ±2% |
Maximum Charge Current | 10 A or 20 A (Selectable) | |
PROTECTION | ||
Full Protection | Overload, short circuit and polarity reserve protection (Internal Non Customer Serviceable Fusible Links) | |
PHYSICAL | ||
Dimension, D X W X H (mm) | 300 x 360 x 88 | |
Net Weight (kgs) | 4.6 | 4.8 |
OPERATING ENVIRONMENT | ||
Humidity | 0 to 90% Relative Humidity(Non-condensing) | |
Operating Temperature | 0℃ to 40℃ | |
Storage Temperature | -15℃ to 50℃ |
Data sheet
Protection | Full Protection: Overload, short circuit, polarity reserve protection |
---|---|
Nominal Capacity | 1.2kVA / 720W |
Nominal Voltage | 230VAC |
Input Voltage Range | 90-280VAC |
Input Frequency Range | 50Hz / 60Hz (Auto Sensing) |
Output Voltage Range | 230VAC +- 10% |
Output Frequency | 50Hz |
Output Waveform | Modified Sine Wave |
Rated Output Power Factor | 0.6 |
Nominal DC Voltage | 12VDC |
Maximum Charge Current | 20A |
Battery Charge Voltage (VDC) | 12 |
Efficiency to Battery Mode | 85% |
LCD Display | Yes with information |
Transfer Time | 20ms typical |
Environment Operating Temperature | 0-40 Degrees Celcius |
Environment Operating Humidity | 0-90% Non-Condensing |
Dimensions Inverter Only (WxDxH) mm | 360 x 360 x 88 |
Weight Inverter Only (kg) | 4.6 |
Reviews
No customer reviews for the moment.
You need to be logged in or create an account to give your appreciation of a review.