Victron Orion-Tr 12/12-30A (360W) Isolated DC-DC converter
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
Victron Orion 24/12-40A DC-DC converter Non isolated
Remote on/off connector
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual).
All models with adjustable output can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.
All models with adjustable output can be paralleled to increase output current
Up to five units can be connected in parallel.
Victron Centaur Charger 24/30(3) 120-240V
The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.
Crucially, and unlike many other products that state universal input, the Centaur range will maintain full output power within the entire specified range. Other features include fully automatic three stage charge characteristic that ensures batteries are fully charged every time and three isolated charge outputs for multi battery configurations to suit the majority of typical installations.
The range spans 12V and 24V models from 16A through to 100A.
- 120-240VAC
- 24VDC charger
- 30A charger
- 3 outputs
Victron BluePower Charger - IP67 - 24V 5A - Smart Charger
Intelligent Charger for WET/Flooded, GEL, AGM, MF, VRLA and Lithium Ion type lead-acid rechargeable batteries.
5 Step "Smart" Battery Charger
180 to 265 V AC Input
24 Volt DC Output
5 Amp @ 12 V (28,8 - 29,4 V)
IP 67 WaterProof
Free Bluetooth Monitoring & Control App
Victron EasySolar-II 48/5000/70-50 MPPT 250/100 GX
All-in-one solar power solution
The Victron EasySolar-II GX integrates the following elements:
• A MultiPlus-II inverter/charger
• A SmartSolar MPPT -Tr solar charge controller
• A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
48VDC, 5000VA
70A Charger, 50A Transfer Switch
250VDC 100A MPPT
Combines the functions of the MuliPlus and MultiGrid
Features of the MultiPlus, + external current transformer option to implement PowerControl & PowerAssist & to optimize self-consumption with external current sensing (max. 32A).
It also has all the features of the MultiGrid with built-in anti-islanding & an increasingly long list of country approvals.
48VDC, 8000VA, 110A Charger, 100A TS
NOTE: CAN RUN IN 3 PHASE CONFIGURATION
CANNOT BE PARALLELLED
Victron MultiPlus 48/1600/20-16 230V VE.Bus
The new style MultiPlus
It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
1600VA / 1300W @ 25°C
12VDC, 20A Charger, Lithium Ion battery compatible
16A Transfer Switch
230VAC
Victron MultiPlus-II 24/5000/120-50 230V
The new style MultiPlus II
It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
5000VA / 4000W @ 25°C
24VDC, 120A Charger, Lithium Ion battery compatible
50A Transfer Switch
230VAC
Victron Smart BatteryProtect 12/24 V 100 A
Smart BP-100
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.
24V, 8A, 1 Output, 230VAC Input
The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
EXIDE POWER PROTECTORS
1.2 KWH 12 Vdc - 230 Vac CEIL Plug 'n Play Pure Sine Wave Inverter/Charger Trolley Kit
Pure Sine Wave Inverter Charger with:
12 V / 100 Ah Delkor DC31 "Calcium" Semi Sealed Maintenance Free Marine Deep Cycle BatterY
Placed on Cost Friendly Poly Carbonate Battery Tub.
NB! 1,2 kWh Battery, 8 Hours Run Time 75 Watt Load, 4 Hrs Runtime - 150 Watt Load.
NB: 10 Hour Recharge Time from 100% Depth of Discharge on 13 A Charge Setting!
6 Month / 250 Cycle Manufacturer Warranty on Delkor DC31 Battery in Inverter Service
Victron Phoenix Inverter 12/500 230V VE.Direct SCHUKO
Inverter
iVOLT LITHIUM
BLUETOOTH SMART
12.8 V 100Ah LIFePO4 DEEP CYCLE BATTERY
Advanced LIFePO4 DEEP CYCLE BATTERY
With Bluetooth App
Limited 5 Year /2000 Cycle Warranty in RSA
East 1000Wh 1kVA 12 V Pure Sine Wave Inverter Charger with LITHIUM Battery / Batteries and C2 / C4 Trolley 1.28kWh OR 2.56kWH 3.84kWh Battery Options.
Multiple Lithium battery options (Multiple warranties)
12VDC, 1A - 40A Charger, Lithium Ion battery compatible
Runtimes on 1 X Lithium Battery: 150W for +- 7 Hours, 200W for +- 5 Hours, 500W for +- 2 Hours
Runtimes on 2 X Lithium Batteries: 150W for +- 13 Hours, 200W for +- 10 Hours, 500W for +- 4 Hours
Runtimes on 3 X Lithium Batteries: 150W for +- 20 Hours, 200W for +- 15 Hours, 500W for +- 6 Hours
Recharge Time: Flat to 95% State of Charge: +- 3-4 Hours for 1 X Battery, 5 - 6 Hours for 2 X Batteries, +- 8 - 9 Hours for 3 X Batteries
- High Efficiency
- Unity Power Factor
- Clean Power, Silent and Efficient
- User Configurable 1A - 40A Mains Battery Charger Settings
- User Configurable Bulk / Absorption and Float Battery Charger Voltage Settings Suitable for Wet Cel, LIFePO4 AGM and Gel VRLA Batteries
- User Configurable Low Battery Alarm and Cut Off Settings
- 230VAC 50Hz Outputs
- C2 Steel Cabinet on Caster Wheels / C4 Cabinet on Caster Wheels for 3 or 4 X Batteries
- 1.2kWh, 2.4kWh, 3.6kWh 4.8kWh LITHIUM Battery Options
East 12 Volt / 1000 Watt 1,2 - 2,4 kWh Lead Acid Battery
Plug and Play Pure Sine Wave Inverter / Charger Trolley Options
Semi-Sealed Lead Acid or VRLA AGM Deep Cycle Battery Options (SELECT OPTION)
Option 1: 1.2 kWh: 1 x DC31 12 V 100 Ah. 150 Watts for 4 Hours Runtime. 7 - 8 Hrs to Recharge
Option 2: 2,4 kWh: 2 x DC31 12 V 100 Ah. 350 Watts for 4 Hours Runtime. 7 - 8 Hrs to Recharge
Option 3: 1.2 kWh: 1 x NXT 12 V 100 Ah AGM VRLA 175 watts for 4 Hours Runtime. 4 Hours to Recharge
Option 4: 2,4 kWh 2 x NXT 12 V 100 Ah AGM VRLA 400 watts for 4 Hours Runtime. 5 - 6 Hours to Recharge
ALSO AVAILABLE WITH LITHIUM BATTERIES! CLICK HERE TO VIEW OPTIONS
Freedom Won eTower 5/4
- 5kWh / 4kWh Usable
- 51VDC (Suitable for 48VDC Systems)
- 100Ah / 80Ah Usable
Exide Power Protectors
CEIL 1450 VA 1150 Watt 24 Volt Hybrid Solar Plug and Play Inverter/Charger
With built in PWM 800 Watt / 30 Amp PWM Solar Charge Controller
24 V 15 Amp Mains Charger
-
Plug and Play System
-
1 x CEIL 1450VA DSP Based Pure Sine Wave Solar Hybrid Inverter Charger
-
Built in Mains and PWM Solar Chargers
-
2 X 100Ah Royal / Delkor DC31 True Deep Cycle Batteries
-
1 x CAB-2 Battery Cabinet on Castor Wheels
Victron SmartSolar MPPT 250/100-MC4 VE.Can
12V/24/48V
Solar charge controller with VE.Can (Canbus)
250VDC / 100A
12/24/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410