25mm2 Cable Size to 6mm Crimping Lug
Victron BlueSolar PWM-Pro Charge Controller 12/24V-5A
Solar charge controller
BlueSolar PWM-Pro
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.
• Lighting control function, fully programmable.
• Three stage battery charging (bulk, absorption, float), fully programmable.
• Integrated battery monitor function (Remote Panel needed to display state of charge).
• Load output with low voltage disconnect and manual control (default setting).
• Optional external temperature sensor.
• Load output protected against over load and short circuit.
• Protected against reverse polarity connection of the solar panels and/or battery.
• Day/night timing options: see manual Remote Panel for details.
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron Orion-Tr 24/12-15 (180W) DC-DC converter Non isolated
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.
M6 eyelet connector
with 30A fuse
The ET112 (for single phase max. 100A) and the ET340 (for three phase max. 65A) Energy Meters are typically used in an Energy Storage System.
To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.
Victron Phoenix Inverter 12/1600 230V VE.Direct IEC
Inverter
25mm Sq DC Double Insulated Battery Cable Black (price per m)
Fuse Box - 1 in and 6 out with negative bus bar and LED Indicator
- 6 Circuits with Cover and Negative Bus
- Main Line Terminal Rating: M5 Threaded Studs(100a 32V DC Max)
- Wire Size: #4-6 AWG
- Red LED indicates when fuse is broken
- Size of Panel: 87.75mm x 85.0mm
Garmin LiveScope™ Plus System, With GLS 10™ and LVS34 Transducer
With GLS 10™ Module and LVS34 Transducer
PART NUMBER 010-02706-00
- LiveScope GLS 10 sonar black box
- Panoptix LVS34 transducer
- Perspective mount
- Trolling motor barrel mount
- Shaft mount
- Power cable
- 2 metre Garmin Marine Network cable (small connector)
- Network adapter cable
- Documentation
Victron Orion-Tr Smart 24/12-30A (360W) Isolated DC-DC charger
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion-Tr Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Victron Orion 24/12-70A DC-DC converter IP20 Non isolated
Remote on/off connector
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual).
All models with adjustable output can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.
All models with adjustable output can be paralleled to increase output current
Up to five units can be connected in parallel.
Victron GX LTE 4G-E LTE Modem & GPS accessory for GX devices (For South Africa)
The GX LTE 4G is a cellular modem for our GX range of monitoring products. It provides a mobile internet connection for the system and connection to the VRM Portal. It works on 2G, 3G and 4G networks.
There are multiple models, refer to the manual to see which model best matches the available cellular network bands in your area.
The GX LTE includes a built-in GPS receiver. When the optional GPS antenna is installed, the system can be tracked as well as Geo-fenced on the VRM Portal.
Victron Battery Monitor BMV-702 Retail
6.5 - 95V
Victron Quattro 48/10000/140-100/100 230V VE.Bus
Multifunctional
Pure Sine Wave Inverter / Charger
2 AC Inputs and Auto connects to active source
adaptive charging, hybrid PowerAssist technology, plus multiple system integration features such as 3ph or 1ph / parallel operation.
10000VA / 8000W @ 25°C
48VDC, 140A Charger, Lithium Ion battery compatible
230VAC
10mm2 Cable Size to 8mm Crimping Lug
The GX IO-Extender 150 enhances the input and output (I/O) capabilities of a GX device, enabling seamless integration with additional sensors, controls, and external devices. It connects via USB, which also serves as its power source, providing a simple and efficient expansion solution. The device can be controlled using Node-RED on the GX device as well as the Switch pane in the user interface.
Victron Sun Inverter 12/250-15 IEC
The Sun Inverter combines a sinewave inverter and a PWM solar charger in one enclosure and is easy to install, with a minimum of wiring.
The inverter allows you to power domestic equipment - requiring 230V AC - using 'leisure' or 'automotive' batteries rated at 12V or 24V.The solar charger ensures that the batteries are being charged by energy harvested from your solar panels. The charge algorithm is programmable.
The inverter and solar charger parameters can be read out via Bluetooth using the VictronConnect app. In addition to this, the inverter has a VE.Direct Port for connection to a GX device or GlobalLink 520 for system monitoring.
Garmin Trolling Motor DC Circuit Breaker / Isolator 60A - 42 Volt
Circuit Breaker / Isolator / Cut Out
Warning: Use a minnimum of 10mm square cable