Victron Phoenix Charger 24/16 (2+1) 120-240V
Adaptive 4-stage charge characteristic: bulk - absorption - float - storage. Two full rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz.
The Phoenix charger features a microprocessor controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimise the charge process relative to the way the battery is being used.
- 120-240VAC
- 24VDC charger
- 16A charger
- 2 outputs at 24V 16A
- 1 output at 24V 4A
Victron Phoenix Charger 12/30 (2+1) 120-240V
Adaptive 4-stage charge characteristic: bulk - absorption - float - storage. Two full rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz.
The Phoenix charger features a microprocessor controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimise the charge process relative to the way the battery is being used.
- 120-240VAC
- 12VDC charger
- 30A charger
- 2 outputs at 12V 30A
- 1 output at 12V 4A
Victron Centaur Charger 12/40(3) 120-240V
The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.
Crucially, and unlike many other products that state universal input, the Centaur range will maintain full output power within the entire specified range. Other features include fully automatic three stage charge characteristic that ensures batteries are fully charged every time and three isolated charge outputs for multi battery configurations to suit the majority of typical installations.
The range spans 12V and 24V models from 16A through to 100A.
- 120-240VAC
- 12VDC charger
- 40A charger
- 3 outputs
Victron Phoenix IP43 Smart Charger 12 V / 50 A (1+1) 120 - 240V ac
</ = 50 A Main House Battery Charger Plus </= 4 A Battery Maintainer for Primary Cranking Battery
Wide AC Input Range 120-240 Vac
Adjustable DC Output Current Setting
Ready for Parallel and Redundant Operation
Natural Convection Cooling
Adaptive 5 Stage Charge Algorithm
Less than 1 mA Self Consumption
Full Rated Output up to 40 Deg C
IP43 Degree of Ingress Protection
Requires CE 13 "Kettle" Plug - Not Included
Victron Phoenix IP43 Smart Charger 24 V / 25 A (1+1) 120 - 240V ac
</ = 25 A Main House Battery Charger Plus </= 3 A Battery Maintainer for 24 V Primary Cranking Battery
Wide AC Input Range 120-240 Vac
Adjustable DC Output Current Setting
Ready for Parallel and Redundant Operation
Natural Convection Cooling
Adaptive 5 Stage Charge Algorithm
Less than 1 mA Self Consumption
Full Rated Output up to 40 Deg C
IP43 Degree of Ingress Protection
Requires CE 13 "Kettle" Plug - Not Included
Victron Phoenix Smart IP43 Charger 12/50(3) 230V
Wide AC Input Range 120-240 Vac
Adjustable DC Output Current Setting
Ready for Parallel and Redundant Operation
Natural Convection Cooling
Adaptive 5 Stage Charge Algorithm
Less than 1 mA Self Consumption
Full Rated Output up to 40 Deg C
IP43 Degree of Ingress Protection
Requires CE 13 "Kettle" Plug - Not Included
Victron SmartSolar MPPT 250/70 Tr
Solar charge controller
250VDC / 70A
12/24/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron Phoenix Smart IP43 Charger 24/25(3) 230V
Wide AC Input Range 120-240 Vac
Adjustable DC Output Current Setting
Ready for Parallel and Redundant Operation
Natural Convection Cooling
Adaptive 5 Stage Charge Algorithm
Less than 1 mA Self Consumption
Full Rated Output up to 40 Deg C
IP43 Degree of Ingress Protection
Requires CE 13 "Kettle" Plug - Not Included
Victron MultiPlus 48/1600/20-16 230V VE.Bus
The new style MultiPlus
It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
1600VA / 1300W @ 25°C
12VDC, 20A Charger, Lithium Ion battery compatible
16A Transfer Switch
230VAC
Victron BlueSolar MPPT 150/100-Tr VE.Can Solar Charge Controller 12V/24V/48V
Solar charge controller
100VDC / 20A
12V/24V/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron MultiPlus 12/1200/50-16 230V VE.Bus
The new style MultiPlus
It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
1200VA / 1000W @ 25°C
12VDC, 50A Charger, Lithium Ion battery compatible
16A Transfer Switch
230VAC
Victron MultiPlus 24/1200/25-16 230V VE.Bus
The new style MultiPlus
It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
1200VA / 1000W @ 25°C
24VDC, 25A Charger, Lithium Ion battery compatible
16A Transfer Switch
230VAC
Victron Centaur Charger 12/50(3) 120-240V
The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.
Crucially, and unlike many other products that state universal input, the Centaur range will maintain full output power within the entire specified range. Other features include fully automatic three stage charge characteristic that ensures batteries are fully charged every time and three isolated charge outputs for multi battery configurations to suit the majority of typical installations.
The range spans 12V and 24V models from 16A through to 100A.
- 120-240VAC
- 12VDC charger
- 50A charger
- 3 outputs
Victron BlueSolar MPPT 250/70-Tr VE.Can Solar Charge Controller 12V/24V/48V
Solar charge controller
100VDC / 20A
12V/24V/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron MultiPlus Compact 12/800/35-16 230V VE.Bus
Multifunctional
Pure Sine Wave Inverter / Charger, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
800VA / 700W @ 25°C
12VDC, 35A Charger, Lithium Ion battery compatible
16A Transfer Switch
230VAC
Victron Phoenix Smart IP43 Charger 24/25(3) 120-240V
Wide AC Input Range 120-240 Vac
Adjustable DC Output Current Setting
Ready for Parallel and Redundant Operation
Natural Convection Cooling
Adaptive 5 Stage Charge Algorithm
Less than 1 mA Self Consumption
Full Rated Output up to 40 Deg C
IP43 Degree of Ingress Protection
Requires CE 13 "Kettle" Plug - Not Included
Victron Phoenix Smart IP43 Charger 12/50(3) 120-240V
Wide AC Input Range 120-240 Vac
Adjustable DC Output Current Setting
Ready for Parallel and Redundant Operation
Natural Convection Cooling
Adaptive 5 Stage Charge Algorithm
Less than 1 mA Self Consumption
Full Rated Output up to 40 Deg C
IP43 Degree of Ingress Protection
Requires CE 13 "Kettle" Plug - Not Included
Victron EV Charging Station NS
The EV Charging Station NS has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.
The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN.
The charger can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM.
Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system.
It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.
Victron EV Charging Station
The EV Charging Station has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.
It has a built-in LCD touch screen for monitoring and control directly from the charging station. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN.
The EV Charging Station can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM.
Not only does this EV Charging Station fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system.
It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.
Victron SmartSolar MPPT 250/70-Tr VE.Can
12V/24/48V
Solar charge controller with VE.Can (Canbus)
250VDC / 70A
12/24/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron Autotransformer 120/240V-100A
An Autotransformer can be used for step up, step down and split phase output balancing purposes.
While the step up and step-down functions are fairly straightforward, split phase output balancing may require some more attention.
Victron Centaur Charger 12/60(3) 120-240V
The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.
Crucially, and unlike many other products that state universal input, the Centaur range will maintain full output power within the entire specified range. Other features include fully automatic three stage charge characteristic that ensures batteries are fully charged every time and three isolated charge outputs for multi battery configurations to suit the majority of typical installations.
The range spans 12V and 24V models from 16A through to 100A.
- 120-240VAC
- 12VDC charger
- 60A charger
- 3 outputs
Victron SmartSolar MPPT 250/70-MC4 VE.Can
12V/24/48V
Solar charge controller with VE.Can (Canbus)
250VDC / 70A
12/24/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
The CANUSB interface is used to connect a VE.Can product to a computer.
Victron SmartSolar MPPT 150/100-Tr VE.Can
12V/24/48V
Solar charge controller with VE.Can (Canbus)
150VDC / 100A
12/24/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron SmartSolar MPPT 150/100-MC4 VE.Can
12V/24/48V
Solar charge controller with VE.Can (Canbus)
150VDC / 100A
12/24/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron MultiPlus 48/2000/25-32 230V VE.Bus
The new style MultiPlus
It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
2000VA / 1600W @ 25°C
24VDC, 25A Charger, Lithium Ion battery compatible
32A Transfer Switch
230VAC
Victron 25A Buck-Boost DC/DC converter
DC-DC Converter for charging a 12/24V service battery in vehicles with an intelligent dynamo.
The Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12/24V service battery in vehicles with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.
Victron SmartSolar MPPT 250/85-Tr VE.Can
12V/24/48V
Solar charge controller with VE.Can (Canbus)
250VDC / 85A
12/24/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron Phoenix Inverter Compact 24/1600 230V VE.Bus
The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V.
Victron Phoenix Inverter Compact 12/1600 230V VE.Bus
The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V.
BMV-710H Smart
The BMV-710H is a high precision battery monitors that have been specially designed for systems with a high battery voltage ranging from 60 to 385 Volts.
WITH BLUETOOTH
Victron SmartSolar MPPT 250/85-MC4 VE.Can
12V/24/48V
Solar charge controller with VE.Can (Canbus)
250VDC / 85A
12/24/48V Battery
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410