Victron Filax 2 Transfer Switch CE 230V/50Hz-240V/60Hz
The Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors.
Victron Orion-Tr 12/24-15A (360W) Isolated DC-DC converter
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
East 1600 Watt / 1600 VA 24 V Pure Sine Wave Inverter Charger
HEAD UNIT ONLY
- High Efficiency
- Unity Power Factor
- Clean Power, Silent and Efficient
- User Configurable 10 - 40 Amp Mains Battery Charger Settings
- User Configurable Bulk / Absorption and Float Battery Charger Voltage Settings Suitable for Wet Cel, LIFePO4 AGM and Gel VRLA Batteries
- User Configurable Low Battery Alarm and Cut Off Settings
- 230 V 50 Hz Outputs
Victron BluePower Charger - IP67 - 24V 8A - Smart Charger
Intelligent Charger for WET/Flooded, GEL, AGM, MF, VRLA and Lithium Ion type lead-acid rechargeable batteries.
5 Step "Smart" Battery Charger
180 to 265 V AC Input
24 Volt DC Output
8 Amp @ 12 V (28,8 - 29,4 V)
IP 67 WaterProof
Free Bluetooth Monitoring & Control App
Victron MultiPlus 24/500/10-16 230V VE.Bus
The new style MultiPlus
It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
500VA / 430W @ 25°C
24VDC, 10A Charger, Lithium Ion battery compatible
16A Transfer Switch
230VAC
Mecer 1kVA Plug and Play On-line Single Phase Input and Output UPS
NOTE SPECIFICATIONS ARE SUBJECT TO CHANGE
ME-1000-WPTU+ NEW MODEL
- 1kVA / 800 Watt
- Internal Batteries
- Plug and Play High Frequency UPS
- On-Line Topology with built in bypass
Please contact us for quantity discounts
Email: info@createenergy.co.za or telephone: +(27) 11 888 0410
Victron Phoenix Inverter 48/500 230V VE.Direct SCHUKO
Inverter
Mecer 10kVA Plug and Play On-line Single Phase Input and Output UPS
- 10kVA / 9000 Watt
- Internal Batteries
- Higher power density, more power output
- Wider input range, higher efficiency
- Ultra low noise, multiple configurable options
- High quality LCD with wide view
Please contact us for quantity discounts
Email: info@createenergy.co.za or telephone: +(27) 11 888 0410
Victron BlueSolar PWM-Light Charge Controller 12/24V-5A
Solar charge controller
BlueSolar PWM-Pro
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.
• Lighting control function, fully programmable.
• Three stage battery charging (bulk, absorption, float), fully programmable.
• Integrated battery monitor function (Remote Panel needed to display state of charge).
• Load output with low voltage disconnect and manual control (default setting).
• Optional external temperature sensor.
• Load output protected against over load and short circuit.
• Protected against reverse polarity connection of the solar panels and/or battery.
• Day/night timing options: see manual Remote Panel for details.
BlueSolar PWM-Light
• Load output with low battery voltage disconnect function.
• Lighting control function, one timer only.
• Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.
• Three stage battery charging (bulk, absorption, float), not programmable.
• Load output protected against over load and short circuit.
• Protected against reverse polarity connection of the solar array and/or battery.
• Day/night timing options: see manual for details
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron Orion-Tr 12/24-10A (240W) Isolated DC-DC converter
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
Victron Orion IP67 24/12-20A (240W) DC-DC Converter Non Isolated
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.
Freedom Won eTower 5/4
- 5kWh / 4kWh Usable
- 51VDC (Suitable for 48VDC Systems)
- 100Ah / 80Ah Usable
NOTE: EXCLUDES BASE PLATE, BUS BARS, ACCESSORIES
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
CSB EVX12340 Deep Cycle AGM VRLA Traction Sealed Lead Acid Battery (Electric Vehicle)
8 Year Design Life
12 Volts
34 Amp Hours
Please contact us for quantity discounts
Email: info@createenergy.co.za or telephone: +(27) 11 888 0410
Lithtech TE24100B Bluetooth Smart 25.6 Volt (24V / 25.6V) 100 Amp Hour (100Ah) Lithium Iron Phosphate Battery Pack
5000+ Cycle Life, Over 1200 Units Sold
NO FAILURES (ZERO 0% FAILURE RATE)
NOW WITH BLUETOOTH SMART BMS
Lithtech TE12200B Bluetooth Smart 12 Volt (12.8V) 200 Amp Hour (200Ah) Lithium Iron Phosphate Battery Pack
5000+ Cycle Life, Over 1200 Units Sold
NO FAILURES (ZERO 0% FAILURE RATE)
NOW WITH BLUETOOTH SMART BMS
Adventure-X 12V 80Ah 1100 CCA Sodium-Ion (Na+) Engine Start & Deep Cycle Storage Battery
Tier One Grade A Cells
Bluetooth Smart BMS
5000 Cycle Life and 5 Years Warranty
Over Current, Short Circuit, Over Charge and Over Discharge Protection
High & Low Temperature Auto Cut-Off Protection
Water-Proof IP67 Casing
Certified with CE / UN38.3 / MSDS /IEC
Lithium Battery - WITH BLUETOOTH BMS
The Adventure-X 100 Ah battery serves as a great accessory to power your off-road adventures.
Specifications
- Capacity: 100Ah
- Nominal Voltage: 12.8V
- Maximum Continuous Discharge Current: 100 Amps
- Peak Discharge Current (10 sec): 120 Amps
- Maximum Continuous Charge current: 60 Amps
- Weight: 9kg
- Short Circuit Protection: Yes
- Over Voltage Protection: Yes
- Under Voltage Protection: Yes
- Over Current Protection: Yes
- Dimensions 260mm x 175mm x 211mm
Performance
- Charge Temperature: 0°C- 65°C
- Discharge Temperature: -10°C- 65°C
- Number of Cycles (100% DOD): 4000
- Warranty: 5 Years
Watersnake GeoSpot 24 Volt 80 lb Thrust 66 Inch Shaft GPS Bow Mount Motor
GPS Electric Steer Bow Mount Trolling Motor With Hand Held Remote and Nav Sensor
Anchor Mode (Spot Lock)
Pilot Mode
Navigation Mode
Voltage: 24 Volts
Power: 80 lbs Thrust
Shaft: 66" 168 cm
Amperage" 35 - 40 Amps
Speeds: Variable
Hand Held Wireless Control and Nav Sensor Included
Salt Water Ready
OPTIONAL:
Foot Pedal
Nylon Quick Release Bracket
East 2.56kWh 1000W Lithium Lithtech Plug and Play Kit 12V Inverter / Charger Pure Sine Wave
East Warranty: 1 Year Manufacturer's warranty on the Inverter / Charger (Owing to normal use)
Lithtech 12.8V 100Ah Warranty: 3 Year / 2000 Cycles (Whichever comes first) Manufacturer's Carry in Warranty (Owing to normal use)
12VDC, 1A - 40A Charger, Lithium Ion battery compatible
Runtimes on 2 X Lithium Batteries: 150W for +- 13 Hours, 200W for +- 10 Hours, 500W for +- 4 Hours
Recharge Time: Flat to 95% State of Charge: +- 5 - 6 Hours for 2 X Batteries
- High Efficiency
- Unity Power Factor
- Clean Power, Silent and Efficient
- User Configurable 1A - 40A Mains Battery Charger Settings
- User Configurable Bulk / Absorption and Float Battery Charger Voltage Settings Suitable for Wet Cel, LIFePO4 AGM and Gel VRLA Batteries
- User Configurable Low Battery Alarm and Cut Off Settings
- 230VAC 50Hz Outputs
- C2 Steel Cabinet on Caster Wheels / C4 Cabinet on Caster Wheels for 3 or 4 X Batteries
- 1.2kWh, 2.4kWh, 3.6kWh 4.8kWh LITHIUM Battery Options
Victron Phoenix IP43 Smart Charger 12 V / 30 A (1+1) 230V
</ = 30 A Main House Battery Charger Plus </= 4 A Battery Maintainer for Primary Cranking Battery
Wide AC Input Range 120-240 Vac
Adjustable DC Output Current Setting
Ready for Parallel and Redundant Operation
Natural Convection Cooling
Adaptive 5 Stage Charge Algorithm
Less than 1 mA Self Consumption
Full Rated Output up to 40 Deg C
IP43 Degree of Ingress Protection
Requires CE 13 "Kettle" Plug - Not Included
Victron BlueSolar PWM-Pro Charge Controller 12/24V-20A
Solar charge controller
BlueSolar PWM-Pro
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.
• Lighting control function, fully programmable.
• Three stage battery charging (bulk, absorption, float), fully programmable.
• Integrated battery monitor function (Remote Panel needed to display state of charge).
• Load output with low voltage disconnect and manual control (default setting).
• Optional external temperature sensor.
• Load output protected against over load and short circuit.
• Protected against reverse polarity connection of the solar panels and/or battery.
• Day/night timing options: see manual Remote Panel for details.
CONTACT US FOR QUANTITY DISCOUNTS / INSTALLER / RESELLER PRICING
info@createenergy.co.za / 0118880410
Victron Orion-Tr 24/24-12A (280W) Isolated DC-DC converter
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
Victron Orion-Tr Smart 24/12-30A (360W) Non-isolated DC-DC charger
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
The Orion-Tr Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.