Airmar Lowrance P-79 50-200 khz XSONIC Shoot Through Hull Transducer 9 Pin "Black" Socket

Airmar P79 50-200 khz Xsonic Shoot Through Hull Transducer with 9 Pin "Black" Connector

Adjusts to hull deadrise angles up to 22°. This ensures that the beam is vertically oriented to receive echos resulting in accurate depth readings.

Fitted with XSONIC plug for LOWRANCE 9 - Pin (Black Transducer Plug as on Elite-Ti / Ti2 & HDS LIVE and HDS Carbon)

Xsonic referes to a New "Smart ID Trasducer Concept from Airmar which, when applicable Software is present, will "Self ID Transducer to Multi-Function Head Displays. Requires Adapter Cable (See Reccomended Accesories) to Connect to any Lowrance 7- Pin Blue Transducer Socket.

The P-79 Xsonic in-hull transducer easily adjusts to hull deadrise angles up to 22°. This ensures that the beam is vertically oriented to receive echos resulting in accurate depth readings.

Unlike traditional "puck" type transducers, the P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.

• Frequency: 50/200 kHz
• Cone: 45° / 12°
• RMS Power: 600 W
• In-Hull, Plastic Housing
• Depth only (No Temperature - No DownScan)
• Maximum Depth Range: 50 kHz - 235 m to 353m (800' to 1,200') ... 200 kHz - 118m to 206m (400' to 700')
• Boat Size: Up to 8 m (25')
• Adjusts to hull deadrise angles from 2° to 22°
• Non-toxic anti-freeze (propylene glycol) is used to fill the tank
• Fiberglass Resin, Fusor 100EZ / T10, and MarineTex epoxy can be used to adhere tank to the hull
• Recommended for solid fiberglass hulls
• No holes to drill
• Depth only
• Recommended for solid fiberglass hulls
• Epoxies to aluminum hulls under 0.38 mm (0.15") thick
• Recommended for planing-hull power boats, trailered boats, rigid inflatable boats (RIBS), and racing sailboats
• No hull protrusions

The P79 Xsonic Transducer is easy-to-install, accommodating hull deadrise angles up to 22°

1. Mount the base flange inside the hull
2. Adjust the locking ring for the correct hull deadrise angle
3. Fill the base with non-toxic anti-freeze (propylene glycol)
4. Turn and lock the transducer into the base

Deadrise Intuitive! The unique adjustable-angle design ensures the beam is vertically oriented for maximum echo returns and the best possible performance. Because the transducer is mounted inside the hull, it is the perfect solution for rigid inflatable boats (RIBS) and racing sailboats.

Compatability:

All Lowrance HDS series up to Gen 3 No DownScan or Hybrid Dual Imaging if Fitted Direct to 9 Pin Transonic (Black) Transducer Socket. Use 9 Pin to 7 Pin Adapter Cable to use in Blue Transducer Plug if StructureScan Transducer is fitted to 9 Pin Socket)

All Lowrance Elite Ti Series(No DownScan or Hybrid Dual Imaging)

All Lowrance Hook CHIRP Series (Requires 9 Pin to 7 Pin Adapter Cable to use in Blue Transducer Plug)

Lowrance Legacy Units

9 Pin Black to 7 Pin Blue Transducer Adapter Cable Required for use with Lowrance 2007 / 2008 models including HDS Gen1 & Gen2 (Buttons), Hook Series, Elite DSI Series, X515C, LMS-52C. LMS-527C, LCX-27C, LCX-28C, LCX-37C, LCX-38C, LCX-112C, LCX-113C, Lowrance LCX17M, LCX20C, LCX25C, LCX-26C HD, LCX-110C, LCX-111C HD, LMS-337C DF, LMS-480M DF, X59 DF, X107C DF, X126 DF, X136 DF and earlier Lowrance X52, X102C, X510C, X125, X135, LMS-332C, LMS-480M, 200 kHz (Single frequency sounder using a dual frequency transducer)

CLICK HERE TO VIEW AIRMAR XSONIC P-79 TRANSDUCER SPECIFICATION SHEET