There are no more items in your cart
Victron 3.84kWh 1200VA Lithium Lithtech Plug and Play Kit 12V Multiplus Inverter / Charger
R31,649.00
Tax included
Victron MultiPlus 12/1200/50-16 230V VE.Bus PLUG AND PLAY 3.84kWh LITHIUM KIT
Victron Warranty: 5 Year Manufacturer's warranty on the Inverter / Charger (Upgradeable to 10 Years within first 4 years, Owing to normal use)
Lithtech 12.8V 100Ah Warranty: 3 Year Manufacturer's Carry in Warranty (Owing to normal use)
1200VA / 1000W @ 25°C
12VDC, 50A Charger, Lithium Ion battery compatible
Runtimes on 3 X Lithium Batteries: 150W for +- 20 Hours, 200W for +- 15 Hours, 500W for +- 6 Hours
Recharge Time: Flat to 95% State of Charge: +- 6 Hours for 3 X Batteries
16A Transfer Switch
230VAC
Victron MultiPlus 12/1200/50-16 230V VE.Bus PLUG AND PLAY 3.84kWh LITHIUM KIT
Victron Warranty: 5 Year Manufacturer's warranty on the Inverter / Charger (Upgradeable to 10 Years within first 4 years, Owing to normal use)
Lithtech 12.8V 100Ah Warranty: 3 Year Manufacturer's Carry in Warranty (Owing to normal use)
1200VA / 1000W @ 25°C
12VDC, 50A Charger, Lithium Ion battery compatible
Runtimes on 3 X Lithium Batteries: 150W for +- 20 Hours, 200W for +- 15 Hours, 500W for +- 6 Hours
Recharge Time: Flat to 95% State of Charge: +- 6 Hours
16A Transfer Switch
230VAC
Please contact us for quantity discounts
Email: info@createenergy.co.za or telephone: +(27) 11 888 0410
Kit Includes:
1 X Victron MultiPlus 12/1200/50-16 230V VE.Bus
1 X C2 Steel Battery Cabinet / Trolley on Castor Wheels (Can hold up to 3 X 100Ah Lithtech 12V Batteries)
1 X Mounted Multiplug outlet
1 X Power inlet cable
Victron Battery On/Off Switch, Mega Fuse Holder, Mega Fuse and 35mm^2 DC Cables
This unit can charge up to 4 X 100Ah 12V Batteries
3 X Lithtech 12.8V 100Ah Lithium Battery = 3.84kWh (LiFePO4 with built in BMS) (3 year manufacturer's warranty) - (Will run +- 150W of load for +- 20 Hours, +- 200W of load for +- 15 Hours, +- 350W of load for +- 10.5 Hours, +- 500W of load for +- 6 Hours. Recharge Time from flat to full: +- 6 - 7 Hours)
RUNTIMES ARE LOAD DEPENDANT
Optional Victron VE.Bus Smart dongle with RJ45 Cable (THIS ALLOWS FOR MONITORING AND CONTROL OF THE INVERTER VIA BLUETOOTH THROUGH THE FREE VICTRONCONNECT APP)
CLICK HERE TO VIEW THE OPTIONAL VE.BUS BLUETOOTH SMART DONGLE ACCESSORY SO YOU CAN MONITOR AND CONTROL YOUR VICTRON PLUG AND PLAY INVERTER / CHARGER VIA THE FREE VICTRONCONNECT BLUETOOTH APP FOR SMARTPHONES / TABLETS:
CLICK HERE FOR THE OPTIONAL VICTRON BLUETOOTH PLUG AND PLAY ADD ON
Screenshots:
Victron MultiPlus 12/1200/50-16 230V VE.Bus
1200VA / 1000W @ 25°C
12VDC, 50A Charger
16A Transfer Switch
230VAC
Uninterrupted AC power (UPS function)
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Remote Monitoring and Control
Monitor and control your MultiPlus and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more...
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
PowerControl - Dealing with limited generator, shore side or grid power
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist - Boosting the capacity of shore or generator power
Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
High start-up power
Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Search Mode
When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.
Programmable relay
By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).
Reviews
No customer reviews for the moment.
You need to be logged in or create an account to give your appreciation of a review.