EPP CEIL 1.2kwh 12V 850VA Solar Hybrid Pure Sine Wave Plug & Play kit
EPP CEIL 1.2kwh 12V 850VA Solar Hybrid Pure Sine Wave Plug & Play kit
EPP CEIL 1.2kwh 12V 850VA Solar Hybrid Pure Sine Wave Plug & Play kit
EPP CEIL 1.2kwh 12V 850VA Solar Hybrid Pure Sine Wave Plug & Play kit
  • On sale!
  • New
EPP CEIL 1.2kwh 12V 850VA Solar Hybrid Pure Sine Wave Plug & Play kit
EPP CEIL 1.2kwh 12V 850VA Solar Hybrid Pure Sine Wave Plug & Play kit
EPP CEIL 1.2kwh 12V 850VA Solar Hybrid Pure Sine Wave Plug & Play kit
EPP CEIL 1.2kwh 12V 850VA Solar Hybrid Pure Sine Wave Plug & Play kit

EPP CEIL 1.2 kwh 12 V 850VA Solar Hybrid Pure Sine Wave Plug and Play Inverter/Charger Kit with 12V DC31 Deep Cycle Battery

R8,649.00
Tax included
In Stock at Create Energy

Exide Power Protectors

CEIL 1,2 kWh 850 VA 650 Watt Solar Hybrid Plug and Play Inverter/Charger with DC31 DEEP CYCLE Battery in Steel cabinet with wheels

With built in PWM Solar Charger

Plug and Play System

  • 1 x Exide PP CEIL 850VA DSP Based Pure Sine Wave Solar Hybrid Inverter Charger

  • 12 V 15 Amp Mains Charger
    450 Watt / 30 Amp PWM Solar Charge Controller
  • 1 X 100Ah Delkor DC31 Marine Deep Cycle Battery

  • Inverter/Charger is free standing

  • 1 x Poly Carbonate Battery Box

Description

Exide Power Protectors

CEIL 1,2 kWh 850 VA 650 Watt Solar Hybrid Solar Plug and Play Inverter/Charger with DC31 DEEP CYCLE Battery in Steel cabinet with wheels

With built in PWM Solar Charger

Plug and Play System

  • 1 x Exide PP CEIL 850VA DSP Based Pure Sine Wave Solar Hybrid Inverter Charger

  • 12 V 15 Amp Mains Charger
    450 Watt / 30 Amp PWM Solar Charge Controller
  • 1 X 100Ah Delkor DC31 Marine Deep Cycle Battery

  • Inverter/Charger is free standing

  • 1 x Poly Carbonate Battery Box

THIS IS A PURE SINE WAVE INVERTER!

NB: While modified sine wave technology is cheaper, it is, however, also 20 % less power efficient thus imposing additional load on the battery shortening both run time and longevity of the battery.

Modified Sine Wave Inverters should not be used to feed AC Driven Motor Appliances (e.g. Fans, Refrigerators.)

Pure Sine Wave Inverters can be used with AC Motor Driven Appliances. However, when Electrical Motors start, a large inrush current is imposed on the motor. The Rated Running Current of the Motor May not, in most cases, exceed 30 % of the Inverter Current Rating!

HOW TO DETERMINE YOUR RUN TIME REQUIREMENT

(PLEASE READ)

You can tell the max power consumption of your equipment by looking at the power supply of the equipment or the rating plate For example, on a laptop power supply, we would look for output specifications, this could be for example: 19.5VDC, 3.3A 19.5V X 3.3A = max of 65W

Typical Loads Imposed by Various Common Appliances:

 A standard work laptop is generally +-65W (New Dell type 15” laptop)

  •          Gaming laptops generally use +-130W 
  •          Normal workstation PC’s generally use +- 250 to 350W
  •          Gaming PC’s generally use +- 400W – 700W
  •          Wireless Routers generally use 6 – 30 Watts
  •          CPE Boxes generally use 18 – 30 Watts
  •          VOIP Phones generally use 3 – 10 Watts for the wireless base and generally 3W for the VOIP phone  charger (single home voip phone)
  •          LED Desk Lamp is generally: 5W
  •          A TV is generally +-80W – 125W
  •          DSTV Decoder is generally +-45W
  •          A second PC screen (24” LCD / LED) is generally +-26W – 50W
  •          Cell phone chargers are generally +-20W – 40W
  •          Surround Sound systems can be 700W+
  •          Soundbars are generally +-65W for the smaller units
  •          Laser printers can use 300 – 550W+
  •          Please note that anything with a motor may require up to 6 X running current for start-up (Fridges etc), therefore, we do not recommend that fridges are run on any plug and play kit
  •          Do not run coffee machines, kettles, irons, geysers, heaters etc etc.

Exide PP CEIL 850VA DSP Based Pure Sine Wave Solar Hybrid Inverter Chargery Plug and Play Pure Sine Wave Inverter/Charger

CIEL 850 VA Hybrid Solar Plug and Play Inverter/Charger with DC31 DEEP CYCLE Battery in Poly Carbonate Battery Box

With built in PWM Solar Charger

The Exide Power Protectors CEIL (Chloride Electric India Limited) 850VA 12V Solar Hybrid Inverter is a pure sine wave inverter and are very perfect for hybrid solar system. It has inbuilt Pure Sine Wave inverter, PWM solar charger, and Mains SMPS charger in a single unit.

It is specially designed to keep battery healthy for longer time period.

The CEIL 850 VA / 650 Watt Hybrid Solar Plug and Play Inverter Charger is a powerful hybrid inverter with 30 Amp inbuilt solar charge controller. The Solar Inverter charges the battery from both the Grid and Solar panel (If Fitted SOLAR PANEL NOT INCLUDED WITH PRODUCT!).  If Sun energy is available then It charges the battery from solar Panel and if Solar is not available, then the inverter charges the battery from Mains/Grid. It can charge the battery and supply solar power to connected load if solar generation is sufficient otherwise it gives first priority to solar battery charging and then supply additional power to connected loads.

For the minimization of electrical power, it uses optimum utilization of solar power with the technology of interactive solar charging with grid.

With the CEIL 850VA Solar Hybrid Inverter, you get the assurance of quality, using the charge controller fitted by the inverter manufacturer. With the CEIL 1050VA Solar Hybrid inverter, you simply install your solar panel and you are good to go.

Other features are it is facilitated with high surge power of starting critical load, simple and easy handling with high reliability. Another significant point is its very low no load current.

Pure Sine Wave Solar Inverters perform adequate for general home lighting and computer use. The charging current and algorithm is designed for prolonged battery life.

SALIENT FEATURES

a) DSP Based Design with absolute and stable Sine Wave output voltage and frequency

b) State of the art MOSFET based PWM technology with greater efficiency at lower cost with Dynamic Stability

c) Over Temperature Protection

d) More back-up being a Sine Wave UPS (ASIC Control)

e) No humming Noise (Silent UPS)

f) Selector Switch for Normal / UPS

g) Selector Switch for High Charging and Low Charging

h) Intelligent Charger for Deep Discharged Battery.

Advance Battery Management for longer battery life and prevent battery from overcharging

THE PP 850 


Delkor DC31 Marine Deep Cycle Battery

100 A/H 12 V

Semi Sealed Maintenance Free

  • Calcium maintenance free dual purpose battery
  • Heavy Duty "Deep Cycle" Wrought lead-calcium grids
  • Low-Resistance envelope separators
  • High strength polypropylene case
  • Heat Sealed covers
  • Exclusive patented liquid gas separator
  • Built in Hygrometer
  • Dual Terminal (SAE Post & 1150K Wing Nut)
  • Ruggedized Heavy Duty Case
  • High CCA Rating

PLEASE NOTE:

The Delkor DC31 is a 12V 100Ah DEEP CYCLE BATTERY

WE RECCOMEND USING THE DC31 (de-coded - Deep Cycle - Group 31 Case Size Marine Deep Cycle Battery) in Domestic Home Inverter Systems!

DELKOR DC 31 LEAD ACID CALCIUM 100 Ah DEEP CYCLE BATTERY

Delkor Deep Cycle DC31

Batteries built to power up every golf game. Give your golf cart, Trolley Inverter, Trolling Motor and / or Recreational Vehicle   a boost with the Delkor Deep Cycle battery. it keeps them running every day, 

Developed with thicker plates, these enduring lead-acid batteries offer a steadfast amount of current over an extended period of time. Perfect for your recreational golf cart vehicles.


Key Benefits 
  • Convenient maintenance-free battery, no topping up of fluid required
  • Heavy-duty long-lasting design
  • Suitable for most vehicles
  • Resistant to stress from repeated cycling and vibration
  • Anchor-bonding provides increased resistance to vibration
  • Contains more active materials than standard flooded batteries 

SPECS

MODEL: DC31
AH(20HR): 100
RC: 180 Minutes
POST TYPE: SAE and 8 mm Stud 
POLARITY: Centre
LENGTH
DIMENSIONS AND MASS 
LENGTH: 330
WIDTH: 172
HEIGHT: 230
MASS: 27 KG
VOLTAGE:12v
GROUP SIZE: GP31DC (Deep Cycle)

BATTERY LIFE EXPECTATION

The DC31 battery has a 1 year manufacturer’s warranty (carry-in owing to normal use) / 200-300 Cycles @ 80 % Depth of Discharge in Leisure / Marine Use.

The DC31 battery has a 6 MONTH manufacturer’s warranty (carry-in owing to normal use) / 200-300 Cycles @ 80 % Depth of Discharge in Inverter / Standby / UPS Use.

This translates roughly to 200-300 Loadsheddings of 2.5 - 4 Hours Duration (Dependent on load) or 4 - 5 Years Life on Float Charge (Whichever comes first)

Failure to allow sufficient Recharge Time between Loadshedding Events to achieve at least 90 % State of Charge results in ABNORMAL WEAR AND TEAR  due to the battery continuously and repetitively operating in the lower band of State of Charge. An analogy would be operating the Pneumatic Tyres on your car at low pressure (Voltage is "Electrical Pressure")

Fully Discharged Batteries take +- 8 – 16 Hours to fully recharge at the recommended charge rate of 10 % of Capacity. (+-10A Charge on a Wet Cell Calcium Deep Cycle Battery)

We highly recommend that you size your battery accordingly to achieve 4+ hours runtime to Full Discharge (10.5 Volts)

One DC31 Batteries will run 150 Watts of Load for FOUR Hours before reaching the Low State Of Charge Cut Off Voltage.

This results in a Discharge of approximately 100% on a 150 Watt Load after the end of each 4 Hour Loadshedding event, and, at some time during a 24 Hr period, an extended  "rest period" of 10 hours during which the battery can fully Charge to 100 %.

During Eskom Stages 1 - 4 the average loadshedding is 2 hours, this means that the battery will be discharged to +-50% , leaving 5 hours charge time (about 50 Ah) to reach "Near Full State of Charge" between Load Shedding events, and, at some time during a 24 Hr period, an extended "rest period" of 10 hours during which the battery can fully Charge to 100 %. (This "Rest Period):

During Periods of Sustained Stage 5 and higher Load Shedding Events we would suggest reducing loads to bare minimum items needed / turning the inverter output off if not in use / Increasing Battery and or Inverter capacity

Product Details
PP850SH-DC31-C2

Data sheet

ProtectionFull Protection: Overload, short circuit, polarity reserve protection
Battery Rated Capacity Amp-hour @20 Hr Rate to 1.6Volts per Cell100
Battery Rated Nominal Voltage12
Battery Terminal TypeSAE Post and 1150K Wing Nut
Nominal Capacity1.45kVA / 1100W
Nominal Voltage230VAC
Input Frequency Range50Hz
Output Voltage Range220VAC +- 7%
Output Frequency50Hz
Output WaveformPure Sine Wave
Rated Output Power Factor0.8
Reviews(0)

Reviews

No customer reviews for the moment.

You need to be logged in or create an account to give your appreciation of a review.

This website use cookies to ensure you get the best experience on our website.Privacy Policy

Sign in

CREATE ENERGY

Your cart

There are no more items in your cart